メインコンテンツにスキップ

この手順に変更

Andrew Bookholtさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Insert wisdom hereCarefully insert a putty knife into the crevice in between the top cover and bottom housing. Start on the left side first. Push the blade down until you meet firm resistance (roughly 3/8 of an inch).
[* black] Gently enlarge the existing crevice by rotating the putty knife downward and away from the mini.
[* icon_note] It helps to start in the middle, then work along the edge until the bottom housing pops up slightly
.
[* black] Insert wisdom hereCarefully insert a putty knife into the crevice in between the top cover and bottom housing. Start on the left side first. Push the blade down until you meet firm resistance (roughly 3/8 of an inch).
[* black] Gently enlarge the existing crevice by rotating the putty knife downward and away from the mini.
[* icon_note] It helps to start in the middle, then work along the edge until the bottom housing pops up slightly
.