メインコンテンツにスキップ

手順3に変更

- Bethanyによって編集

承認済みの編集 : Bethany

変更なし

手順ライン

[* red] Remove the two connector pins from the wifi card using tweezers.
-[* icon_caution] When following guide backwards, the pins require some finesse to fit them back onto the card. It will take time to put back on. Be sure to line up the socket on the cable to the pin socket on the card.
+[* icon_reminder] When following guide backwards, the pins require some finesse to fit them back onto the card. It will take time to put back on. Be sure to line up the socket on the cable to the pin socket on the card.