手順2に変更
- Justin Ogiharaによって編集
承認済みの編集 : Justin Ogihara
- 前
- 後
- 変更なし
手順ライン
| [* red] Lift up on the connector gate with a pair of precision tweezers, which clamps down on the end of the ribbon cable. | |
| [* icon_note] In the second picture, the foam is pulled back for clarity. | |
| - | [* orange] With the pair tweezers, firmly clamp down on the ribbon cable, and pull it away from the connector gate. |
| + | [* orange] With the pair of tweezers, firmly clamp down on the ribbon cable, and pull it away from the connector gate. |