メインコンテンツにスキップ

手順13に変更

panheadsnakeさんによる編集

編集が拒否されました。 : David Hodson

変更なし

手順ライン

-[* black] Remove the following seven screws securing the logic board to the rear case:
+[* black] Remove the following nine screws securing the logic board to the rear case:
[* red] Three coarse-thread T10 Torx.
[* orange] Three fine-thread T10 Torx.
[* yellow] One long coarse-thread T10 Torx.
+ [* icon_caution] Two long corse thread T10 Torx on each side the memory compartment If not removed it will break the motherboard