メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順7に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Disconnect the following connectors from the logic board:
[* red] Camera/IR board cable.
[* orange] Optical drive fan.
[* icon_note] When removing these connectorsthe optical drive fan connector, it is helpful to use a spudger or your fingernails to push the ears on either side of the connector toward the top edge of the iMac.
[* icon_caution] TheTo aid in removing the camera/IR board cable connectorconnector, it is very wide and delicate. Slowly walkhelpful to use one hand to pinch the connector out of its socket by pushing either sidecables against a spudger and pull up toward the top edge of the iMaciMac while pulling up gently on the cables with your other hand.
[* icon_note] When removing these connectorsthe optical drive fan connector, it is helpful to use a spudger or your fingernails to push the ears on either side of the connector toward the top edge of the iMac.
[* icon_caution] TheTo aid in removing the camera/IR board cable connectorconnector, it is very wide and delicate. Slowly walkhelpful to use one hand to pinch the connector out of its socket by pushing either sidecables against a spudger and pull up toward the top edge of the iMaciMac while pulling up gently on the cables with your other hand.

画像2

以前の画像はありません

追加