メインコンテンツにスキップ

手順7に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Insert wisdom here.
+[* black] Disconnect the following connectors from the logic board:
+ [* red] Camera/IR board cable.
+ [* orange] Optical drive fan.
+[* icon_note] When removing these connectors, it is helpful to use a spudger or your fingernails to push the ears on either side of the connector toward the top edge of the iMac.
+[* icon_caution] The camera/IR board cable connector is very wide and delicate. Slowly walk the connector out of its socket by pushing either side toward the top of the iMac.

画像1

古いバージョン

新しいバージョン