メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

手順2に変更

Jessica Leyvaさんによる編集

承認済みの編集 : Jessica Leyva

削除済み
追加
変更なし

手順ライン

[* black] To test the heating element, use a standard continuity testerdigital multimeter.
[* black] Set the continuity testermultimeter to the Ohm symbol200 under ACV.
[* black] Bring the ends of the continuity testermultimeter toward the two lead wires.
[* black] To test the heating element, use a standard continuity testerdigital multimeter.
[* black] Set the continuity testermultimeter to the Ohm symbol200 under ACV.
[* black] Bring the ends of the continuity testermultimeter toward the two lead wires.
[* black] If the circuit between the wires is closed, the numbers on the multimeter should keep changing.
[* black] If the numbers are not changing, replace the heating element.
[* black] If the circuit is closed, check the thermal cutout.