メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Jessica Leyvaさんによる編集

承認済みの編集 : Jessica Leyva

削除済み
追加
変更なし

手順ライン

[* black] To test the heating element, use a standard continuity tester.
[* black] Set the continuity tester to the Ohm symbol.
[* black] Bring the ends of the continuity tester toward the two lead wires.
[* black] If the circuit between the wires is closed, the continuity lightnumbers on the multimeter should be onkeep changing.
[* black] If the light isnumbers are not onchanging, replace the heating element or consider buying a new hairdryerelement.
[* black] If the lightcircuit is onclosed, check the thermal cutout.
[* black] If the circuit between the wires is closed, the continuity lightnumbers on the multimeter should be onkeep changing.
[* black] If the light isnumbers are not onchanging, replace the heating element or consider buying a new hairdryerelement.
[* black] If the lightcircuit is onclosed, check the thermal cutout.