メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順2に変更

Jessica Leyvaさんによる編集

承認済みの編集 : Jessica Leyva

変更なし

手順ライン

[* black] To test the heating element, use a standard continuity tester.
[* black] Bring the ends of the continuity tester toward the two lead wires.
[* black] If the circuit between the wires is closed, the continuity light should be on.
[* black] If the light is not on, replace the heating element.
[* black] If the light is
on, check the thermal cutout.
[* black] If the light is not on, replace the heating element.
[* black] If the light is
on, check the thermal cutout.