メインコンテンツにスキップ

手順3に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Insert wisdom here.
+[* black] Use the flat end of a spudger to pry the optical drive ribbon cable connector up off the logic board.
+[* icon_note] The connector is most easily removed when prying from the top or bottom of the connector.
+[* black] Bend the optical drive ribbon cable back away from the logic board.
+[* icon_caution] Be very careful when moving the optical drive ribbon cable as it is delicate and easily ripped.