メインコンテンツにスキップ

手順 5 への変更

- mayerによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Disconnect both inverter cables from the inverter board.
[* icon_note] These connectors are seated very tightly in their sockets. It is helpful to use your fingernails or the tip of a spudger to push the ears on either side of the connectors to dislodge them from their sockets. A small pair of hemostats helps a lot.
[* icon_note] These connectors are seated very tightly in their sockets. It is helpful to use your fingernails or the tip of a spudger to push the ears on either side of the connectors to dislodge them from their sockets. A small pair of hemostats helps a lot.