手順3に変更
drewsof — さんによる編集
編集が拒否されました。 : Adam O'Camb
- 前
- 後
- 変更なし
手順ライン
[* black] Allow the lower EMI shield to hang down from the display. |
[* red] Remove the four 7.5 mm T10 Torx screws securing the display to the rear case. |
[* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit |
[* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit |