メインコンテンツにスキップ

手順 3 への変更

- Andrew Bookholtによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Insert wisdom hereAllow the lower EMI shield to hang down from the display.
[* red] Remove the four T10 Torx screws securing the display to the rear case.
[* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit drivers are too short to reach these screws
.
[* black] Insert wisdom hereAllow the lower EMI shield to hang down from the display.
[* red] Remove the four T10 Torx screws securing the display to the rear case.
[* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit drivers are too short to reach these screws
.

画像1

古いバージョン

新しいバージョン

画像2

以前の画像はありません

追加