メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順5に変更

Al Gritzmacherさんによる編集

承認済みの編集 : Jeff Suovanen

変更なし

手順ライン

[* black] To reassemble the wheel to the bike, perform the steps in reverse order.
[* black] You may need to spread the fork slightly to get the axle into the dropouts.
[* black] Make sure that the quick release skewer tightens onto the fork ends securely. If you loosened it by unscrewing it, you will need to turn it to tighten it. The lever should take a modest amount of pressure to tighten, but not an excessive amount. Adjust by tightening or loosening the quick release.
[* black] Be sure the axle is all the way into the fork slots.
[* black] Squeeze the brake together and replace the cable noodle back into the holder. Check you brake to be sure it works before riding off!