メインコンテンツにスキップ

手順1に変更

Justin Ogiharaさんによる編集

承認済みの編集 : Justin Ogihara

変更なし

手順ライン

[* black] To soften the adhesive holding the tablet together, heat up the edges of the glass panel using a heated ***iOpener*** on the edge of the device.
[* black] We used two ***iOpeners*** to open up the tablet. The process is doable with a single ***iOpener***, but would take substantially longer. Alternatively, you can use a heat gun to quickly loosen the adhesive.
[* black] Leave the ***iOpener ***on edge for two minutes.
-[* icon_caution] Be careful not to burn yourself while handling the hot ***iOpener***.
+[* icon_note] Be careful not to burn yourself while handling the hot ***iOpener***. For more information on the ***iOpener***, use the [guide|11677|iOpener Instructions Guide].