メインコンテンツにスキップ

手順1に変更

Zachary Fuciniさんによる編集

承認済みの編集 : Zachary Fucini

変更なし

手順ライン

-[* icon_note] To soften the adhesive holding the tablet together, heat up the edges of the glass panel using the heated iopener on the edge of the device.
-[* black] Place the iopener on the one edge of the tablet.
-[* black] Leave the iopener on edge for 2 minutes.
-[* icon_reminder] Be careful handling the hot iopener.
+[* black] To soften the adhesive holding the tablet together, heat up the edges of the glass panel using a heated ***iOpener*** on the edge of the device.
+[* black] We used two ***iOpeners*** to open up the tablet. The process is doable with a single ***iOpener***, but would take substantially longer. Alternatively, you can use a heat gun to quickly loosen the adhesive.
+[* black] Leave the ***iOpener ***on edge for two minutes.
+[* icon_caution] Be careful not to burn yourself while handling the hot ***iOpener***.