メインコンテンツにスキップ

手順6に変更

Sam Goldheartさんによる編集

承認済みの編集 : Sam Goldheart

変更なし

手順ライン

[* black] Remove the following four screws securing the internal frame to the bottom housing:
- [* red] Three 6.7 mm Phillips screws
- [* orange] One 9.5 mm Phillips screw
+ [* red] Three 6.7 mm Phillips #00 screws
+ [* orange] One 9.5 mm Phillips #00 screw
[* icon_note] The screw in the lower right corner of this image is recessed deep in the internal frame and longer than the other three screws. A flashlight and a thin screwdriver aid in removal.