メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Push the PRAM battery intoward the center of the logic board and pull it upup out of its holder. You'll have to push the battery in further than you'd expect in order to get it to pop free.
[* icon_caution] Don't bend the metal finger too much or it will break off, requiring a new logic board.
[* black] Push the PRAM battery intoward the center of the logic board and pull it upup out of its holder. You'll have to push the battery in further than you'd expect in order to get it to pop free.
[* icon_caution] Don't bend the metal finger too much or it will break off, requiring a new logic board.
[* icon_reminder] When inserting the new battery, make sure the side with writing along the edges faces the black plastic holder. You should also insure that the metal connectors make contact with the battery (you can bend them forward if they do not).