手順9に変更
- 101 Tech USAによって編集
承認済みの編集 : 101 Tech USA
- 前
- 後
- 変更なし
手順ライン
| - | [* black] As a final help I recorded the shim placement I used for the gearbox in this tutorial. No gearbox is going to be exactly like this one even among other G&G but it can serve as a extra helpful reference to give you an idea of spacing. |
|---|---|
| + | [* black] As a final help I recorded the shim placement I used for the gearbox in this tutorial. No gearbox is going to be exactly like this one even among other G&G AEG's but it can serve as a extra helpful reference to give you an idea of spacing or the ratio shims are added in a given area. |
| [* black] Spur gear Top:(.35mm)x3+(.1mm)=1.15mm Bottom: (.35mm)+(.2mm)=.55mm | |
| [* black] Sector gear Top:(.35mm)x2+(.1mm)=.8mm Bottom: (.35mm)x2+(.1mm)=.8mm | |
| + | [* black] Bevel gear Top: (.35mm)x1=(.35mm) Bottom:(0.35mm)x2=7mm |