G&G AEG Shimming Guide Airsoft手順の7履歴

手順7に変更

2012年11月7日 - 101 Tech USAによって編集

承認済みの編集 : 101 Tech USA

-	[* black] For the bevel gear ~~the requirements are that there has~~ to ~~be full~~ contact with the spur gear teeth to the ~~best of your ability and that the~~ motor gear ~~will be able to have full contacts~~.
+	[* black] For the bevel gear, you will want to maximize contact with the spur gear teeth and have proper engagement with the pinion gear (motor gear).
	[* black] The simple way of achieving this is too shim the bevel slightly higher then center and to give it a little more slop then the other gear. Just make sure the spur gear is making full contact when the bevel is pushed up and not binding when it is pushed down.
-	[* black] There is a more advanced technique for the bevel gear ~~for best results this~~ will be mentioned in the next step.
+	[* black] There is a more advanced technique for shimming the bevel gear which will be mentioned in the next step.