メインコンテンツにスキップ

手順2に変更

Terrence15さんによる編集

承認済みの編集 : Terrence15

変更なし

手順ライン

-[* black] Remove the three screws that secure the hard drive to the computer.{1}{3}
+[title] Removing the Hard Drive Cable
+[* black] Remove the three screws that secure the hard drive to the computer.
[* icon_note] One screw is attached to a metal tab on the metal base of the hard drive, and the other two screws are attached to the metal base.
- [* black] Disconnect the hard drive cable connector from the motherboard.{2}
+ [* black] Disconnect the hard drive cable connector from the motherboard.
[* black] Pull the mylar tab to release the hard drive.
[* black] Lift the hard drive and the hard drive cable out of the computer. You may find it easier to lift the hard drive starting from the side located opposite from the hard drive's connection to the hard drive cable.