メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

[* black] ReleaseSimultaneously pull the tabs on each side of the RAM chip ataway from the same timecenter of the chip. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
[* black] Pull the RAM chip directly out from its connector.
[* black] ReleaseSimultaneously pull the tabs on each side of the RAM chip ataway from the same timecenter of the chip. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
[* black] Pull the RAM chip directly out from its connector.
[* icon_note] If there are two RAM chips installed, repeat the above procedure for the second chip.