メインコンテンツにスキップ

手順 4 への変更

- Andrew Bookholtによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Insert wisdom hereDisconnect both of the following connectors from the logic board:
[* red] Sleep sensor cable.
[* orange] Power button cable.
[* icon_caution] Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.
[* icon_note] When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector
.
[* black] Insert wisdom hereDisconnect both of the following connectors from the logic board:
[* red] Sleep sensor cable.
[* orange] Power button cable.
[* icon_caution] Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.
[* icon_note] When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector
.

画像1

古いバージョン

新しいバージョン