Skip to main content

Changes to this Step

Edit by Andrew Bookholt

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* red] Remove seven Torx T8 screws from the heat sink and fan assembly.
[* icon_reminder] The screw in the upper right corner is shorter than the others.
[*
black] Insert wisdom hereLift the heat sink and fan assembly from its right edge and pull it away from the left side of the lower case to clear the transparent plastic ambient light sensor cover on the DC-in board.
[* black] Lift the heat sink and fan assembly out of the lower case.
[* icon_note] If you need to mount the heat sink back into the laptop, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy
.
[* red] Remove seven Torx T8 screws from the heat sink and fan assembly.
[* icon_reminder] The screw in the upper right corner is shorter than the others.
[*
black] Insert wisdom hereLift the heat sink and fan assembly from its right edge and pull it away from the left side of the lower case to clear the transparent plastic ambient light sensor cover on the DC-in board.
[* black] Lift the heat sink and fan assembly out of the lower case.
[* icon_note] If you need to mount the heat sink back into the laptop, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy
.

Image 1

Old Version

New Version