メインコンテンツにスキップ

手順3に変更

Daniel Fernandezさんによる編集

承認済みの編集 : Daniel Fernandez

変更なし

手順ライン

[* icon_note] The bottom cover is attached via several plastic clips located around the edges of the bottom cover.
[* black] Using a plastic pry tool, gently pry the bottom cover from the laptop.
-[* black] Work the pry tool around the edge of the bottom cover undoing all of the plastic clips, as shown in the picture.
+[* black] Work the pry tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.