メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順4に変更

oldturkey03さんによる編集

承認済みの編集 : oldturkey03

削除済み
追加
変更なし

手順ライン

[* black] Insert wisdom hereCut about 3 inch of the end of the cable.
[* red] To make sure that it was indeed the connector, and not a cracked wire further up, remove the insulation of one set of wires. The Lowrider uses one set for each side. to remove the insulation, you can use a boxcutter, a sharp knife, or a lighter etc.
[* blue] Attach the test lead from any MP3 player, as previously shown. If the reason for the non-functioning headphones was the connector, there should now be sound on the headphone speaker (driver). In this case, there was. Therefore, it was indeed the audio connector that was broken
.
[* black] Insert wisdom hereCut about 3 inch of the end of the cable.
[* red] To make sure that it was indeed the connector, and not a cracked wire further up, remove the insulation of one set of wires. The Lowrider uses one set for each side. to remove the insulation, you can use a boxcutter, a sharp knife, or a lighter etc.
[* blue] Attach the test lead from any MP3 player, as previously shown. If the reason for the non-functioning headphones was the connector, there should now be sound on the headphone speaker (driver). In this case, there was. Therefore, it was indeed the audio connector that was broken
.

画像2

古いバージョン

新しいバージョン

画像3

古いバージョン

新しいバージョン