メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順3に変更

oldturkey03さんによる編集

承認済みの編集 : oldturkey03

削除済み
追加
変更なし

手順ライン

[* black] Insert wisdom hereWith the three screws removed, the driver will simply fold up to reveal the wiring. In this case the color coded wire is Blue for left and Gold for ground.
[* blue] Here is the way I connected some alligator test leads. Use a male-male 3.5 mm stereo cable. Attach one lead to sleeve, the upper part of the connector, and one lead to either tip (front) or Ring (middle) of the connector.
[* red] Attach some test points to the end of the alligator cables and touch the solder connections of the speaker (driver). In this case, there was clear sound. This determined that there was no signal coming from the connector to the drivers
.
[* black] Insert wisdom hereWith the three screws removed, the driver will simply fold up to reveal the wiring. In this case the color coded wire is Blue for left and Gold for ground.
[* blue] Here is the way I connected some alligator test leads. Use a male-male 3.5 mm stereo cable. Attach one lead to sleeve, the upper part of the connector, and one lead to either tip (front) or Ring (middle) of the connector.
[* red] Attach some test points to the end of the alligator cables and touch the solder connections of the speaker (driver). In this case, there was clear sound. This determined that there was no signal coming from the connector to the drivers
.

画像2

古いバージョン

新しいバージョン

画像3

古いバージョン

新しいバージョン