メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

mayerさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* red] Remove the single 2.1 mm Phillips screw securing the AirPort/Bluetooth bracket to the lower case.
[* red] Remove the single 2.1 mm Phillips screw securing the AirPort/Bluetooth bracket to the lower case.
[* icon_note] It is possible to remove the AirPort/Bluetooth board without removing this screw. Alternatively use the sharp end of a spudger to press the metal pressure connector (shown in orange) down through the hole in the AirPort/Bluetooth board, being careful to not break it off when prying the board up in the next step.