メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順5に変更

Miroslav Djuricさんによる編集

承認の保留中

変更なし

手順ライン

[* red] Remove the four 3.4 mm Phillips screws from the DVI connector side of the PowerBook.
[* icon_reminder] When replacing these screws, you must reinstall each screw in the correct order. Begin by installing the screw closest to the display hinge, and go out from there.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.