手順16に変更
- 101 Tech USAによって編集
承認済みの編集 : 101 Tech USA
- 前
- 後
- 変更なし
手順ライン
| [* black] The next task is to remove the fake bolt. | |
| [* blue] Start by removing the C clip as shown. you may need to use a pick to pry it off. | |
| - | [* black] After the clip is remove slide the fake bolt all the way back. With the bolt in the rear position press the fake bolt slightly up. |
| + | [* black] After the clip is remove slide the fake bolt all the way back. With the bolt in the rear position press the fake bolt parts that still attached slightly up. |
| [* green] Use a pick to pry the bolt linking section out of the blow back cylinder on both sides. | |
| [* icon_caution] Careful not too bend the fake bolt as it can harm its functionality. | |
| - | [* yellow] Next remove the retaining strap by using a punch in the little notch shown in Yellow |
| + | [* yellow] Next remove the retaining strap by using a punch in the little notch shown in Yellow and punch off the retaining strap off the back of the gearbox. |