手順10に変更
- 101 Tech USAによって編集
承認済みの編集 : 101 Tech USA
- 前
- 後
- 変更なし
手順ライン
| - | [* black] With magazine catch/release out you can start |
|---|---|
| + | [* black] With magazine catch/release out, you can start by removing the bottom plate on the grip. |
| [* green] Grab a 2mm Hex driver and begin removing the 2 small screws. | |
| - | [* black] With the Hex screws |
| + | [* black] With the Hex screws remove the bottom plate with a set of needle-nose pliers |