メインコンテンツにスキップ

手順2に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Disconnect the SATA data cable from the logic board by carefully pulling it straight away from its socket.
+[* icon_note] The SATA connector on most iMacs tends to stick in its socket on the logic board. If you are having trouble disconnecting the SATA cable, insert a [product|IF145-012|metal spudger] or any other thin tool into the gap between the SATA connector and its socket and twist the spudger's shaft to safely separate the two pieces.