メインコンテンツにスキップ

手順18に変更

Jake Devincenziさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Lift the logic board out of the rear case, minding any cables that may get caught. If the front edge of the logic board, under the RAM sockets, won't pull up, it's sticking on the three plastic mounting pins in the rear housing under this edge. Use either your fingernails, or a spudger, under the front edge of the RAM sockets to gently push up on this edge until it clears these mounting pins.
+[* black] Lift the logic board out of the rear case, minding any cables that may get caught.
+[* icon_note] If the front edge of the logic board, under the RAM sockets, won't pull up, it's sticking on the three plastic mounting pins in the rear housing under this edge. Use a spudger under the front edge of the RAM sockets to gently push up on this edge until it clears these mounting pins.