メインコンテンツにスキップ

手順17に変更

steveさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove the following 13 screws securing the logic board to the rear case:
- [* red] Six coarse-thread T10 Torx.
- [* orange] Two T8 Torx.
- [* yellow] Three fine-thread T10 Torx.
- [* green] Two long T10 Torx.
+ [* red] Six 7.2 mm coarse-thread T10 Torx.
+ [* orange] Two 6.8 mm T8 Torx.
+ [* yellow] Three 7 mm fine-thread T10 Torx.
+ [* green] Two 24 mm T10 Torx.