手順5に変更
- Kate Chamberlainによって編集
承認済みの編集 : Evan Noronha
- 前
- 後
- 変更なし
手順ライン
| [* black] Here is the removed diode. Description on the diode reads LT526 IN4007. | |
| [* black] Solder the new diode onto the power board. Use a pair of tweezers or hemostat to hold the diode in place while soldering. | |
| - | [* black] |
| + | [* black] Once the diode is replaced, clean the board with isopropyl alcohol to get rid of any debris or old flux. |