Oral-B Black 7000 Motor Replacement手順の4履歴

手順4に変更

2017年11月29日 - Jonathan Bowyerによって編集

承認済みの編集 : Jonathan Bowyer

	[* black] Remove the motor housing from the plastic casing. This can be accomplished by using the nylon spudger to pry the motor housing out of the supporting structures.
-	[* ~~black~~] ~~*Note: *~~ The physical parts holding onto the motor are plastic knobs built into the plastic casing. Any manipulation done to the casing to remove the motor should be done within reason so that the casing is able to be reused.
+	[* icon_note] The physical parts holding onto the motor are plastic knobs built into the plastic casing. Any manipulation done to the casing to remove the motor should be done within reason so that the casing is able to be reused.