修理を始めるには コミュニティ ストア

手順1に変更

- Rachel Surridgeによって編集

承認済みの編集 : Rachel Surridge

前
後
変更なし

手順ライン

-[* black] Desolder the red LED wires from the solder pads near the rotating head of the device. These wires are quite delicate, so be sure the solder is fully melted before attempting to pull the wire out.
-[* black] Use a pair of tweezers to remove the plastic housing and the LED from the device.
+[* black] Desolder the red LED wires from the solder pads near the rotating head of the device.
+[* black] ***Caution:*** These wires are quite delicate, so be sure the solder is fully melted before attempting to pull the wire out.