手順18に変更
- Tobias Isakeitによって編集
承認済みの編集 : Tobias Isakeit
- 前
- 後
- 変更なし
手順ライン
| [* black] When it comes to the front-facing camera, we're not quite so pleased—it's very tightly secured in the midframe of the Mate 10 Pro. It wiggles a little, but removing it cleanly is going to be a challenge. So we focus on the display first. | |
| [* black] But getting in between the display and the frame also looks to be a near-impossible task. No amount of heating, pulling, or prying saw any success. The front panel is glued tight and the tolerances are so small that there is simply no gap. | |
| - | [* black] Our only chance is |
| + | [* black] Our only chance is the hole in the midframe for the dual camera. And after using most of the wedging arsenal starting with a Halberd Spudger to an Opening Tool to a regular Spudger we end up with a metal Spudger. And finally a small gap opens up. |