手順6に変更
- Claire Mieschによって編集
承認済みの編集 : Claire Miesch
- 前
- 後
- 変更なし
手順ライン
| [* black] Next point on our checklist—a huge flex cable we've never seen before! | |
| [* black] After the removal of another metal shield and two antenna cables, we go on and lift out the flex cable. | |
| - | [* black] To our surprise, we get not only the flex cable but the complete daughterboard as well. It's glued to the USB-C port, which is equipped with an |
| + | [* black] To our surprise, we get not only the flex cable but the complete daughterboard as well. It's glued to the USB-C port, which is equipped with an IP67-approved rubber gasket. |
| [* icon_note] We're happy to see a fairly modular USB-C port here. If (or when) it finally gives out, you'll just have to replace this big flex cable along with it. |