手順6に変更
- Tobias Isakeitによって編集
承認済みの編集 : Tobias Isakeit
- 前
- 後
- 変更なし
手順ライン
| [* black] Next point on our checklist—a huge flex cable we've never seen before! | |
| [* black] After the removal of another metal shield and two antenna cables, we go on and lift out the flex cable. | |
| - | [* black] To our surprise we're not only holding the flex cable but the |
| + | [* black] To our surprise we're not only holding the flex cable but the complete daughter board glued to the USB-C port which is equipped with an IP76 approved rubber gasket. |
| [* icon_note] We're happy to see that the exchange of the USB-C port seems to be fairly easy, however you have to replace the whole flex cable with it. |