メインコンテンツにスキップ

How to prevent top case separation by lubricating the stiff hinges on MacBook Pro 15" Unibody Late 2008 and Early 2009「はじめに」への変更

- oldnwstfによって編集

承認済みの編集 : oldnwstf

削除
追加
変更なし
デバイス
[ ]MacBook Pro 15" Unibody Late 2008 and Early 2009
Type
[ ]technique
Title
[ ]How to MacBook Pro 15" Unibody Late 2008 and Early 2009
Introduction
Late 2008 MacBook Pros 15 inch models suffer from delamination of the top case which may occur on some models. Apple had a out-of-warranty case that permitted free replacements of 15-inch Late 2008 MacBook Pro displays, but this case was valid until about 2013-2014. [ … ] Upon inspection of several these MacBook Pros 15-inch Late 2008 laptops, I discovered that most of them had very stiff hinges and display opened with too much force. Some of these already had some or heavy delamination of the top case. As the hinges get stiff, more force is applied on the display case which over time causes the glue that holds the outer display housing to break and seperate from the top case (the aluminium panel with Apple logo itself). [ … ] The solution is to lubricate these hinges which is best done with the display removed, also reccomended is to remove clutch cover. [ … ] We would need some light silicon grease or similar product, and squirt it onto the hinges itself.
Time Required Min
30分
Time Required Max
1時間
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
いいえ
Summary
[ ]Lubricate your stiff display hinges to prevent top case housing separation.

ツール

  • Phillips #00 Screwdriver x1 added.
  • T6 Torx Screwdriver x1 added.

パーツ

  • Silicone Spray x1 added.

フラグ

  • In Progress added.
  • Member-Contributed Guide added.

手順

Step #: 1