メインコンテンツにスキップ

How to prevent top case separation by lubricating the stiff hinges on MacBook Pro 15" Unibody Late 2008 and Early 2009「はじめに」への変更

- oldnwstfによって編集

承認済みの編集 : oldnwstf

削除
追加
変更なし
Introduction
had a an out-of-warranty case that permitted free replacements of 15-inch Late 2008 MacBook Pro displays, but this case was valid until about 2013-2014. [ … ] and seperate separate from the top case (the aluminium aluminum panel with Apple logo itself). itself). [ … ] also reccomended recommended is to remove clutch cover. [ ] We would need some light silicon grease or similar product, and squirt it onto the hinges itself. cover.
had a an out-of-warranty case that permitted free replacements of 15-inch Late 2008 MacBook Pro displays, but this case was valid until about 2013-2014. [ … ] and seperate separate from the top case (the aluminium aluminum panel with Apple logo itself). itself). [ … ] also reccomended recommended is to remove clutch cover. [ ] We would need some light silicon grease or similar product, and squirt it onto the hinges itself. cover.
Imageid