メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

How to Monster iBeatsはじめにへ変更

Puruさんによる編集

承認の保留中

変更なし
Introduction
If you have Monster iBeats Headphones or iBeats Headphones with ControlTalk and you are experiencing defects in them particularly at headphones jack spot resulting broken music stream or kind of irritating noise intermittently apparent, you can fix it following this guide. [ … ] Or sometimes you hear the music and sometime you don't, it is sure that the headphones are defective majorly getting the wires broken either at jack spot or at the spot around ControlTalk or divider. [ … ] Or you see the wires off the shape or kind of gap just above the headphones jack spot or you can't answer the call or can't raise the volume neither can stop the music or start, then this guide may help you resolve the issue with your iBeats. [ … ] Before diving into this guide, make sure that you have checked your device with a usable another brink or kind of headphones for similar purpose which will help make sure that iBeats are faulty not the device itself. [ … ] This is my first guide I have been preparing in about 2 hrs so expect errors. But the process of this repair has been refined carefully. Your suggestion is highly appreciated. I'm a Mac technician and my own iBeats demonstrated defects hence I decided to correct it and thought it would be much helpful if I published a self-repair guide. Thanks to iFixit for providing a platform to share ideas.
Time Required Min
15分
Time Required Max
45分

ツール

  • Clear Tape x1 added.
  • Cm Ruller x1 added.
  • Flat Nose Pliers x1 added.
  • Heat Gun x1 added.
  • Large Needle Nose Pliers x1 added.
  • Rubber Band x1 added.
  • Solder x1 added.
  • Soldering Iron x1 added.