メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

LG CU400 Charging Port Replacementはじめにへ変更

Ross Brownさんによる編集

承認済みの編集 : Ross Brown

変更なし
デバイス
[ ]LG CU400
Type
[ ]replacement
Thing
[ ]Charging Port
Title
[ ]LG CU400 Charging Port Replacement
Introduction
[ ]This guide will walk you through the steps to remove the charging port from your LG CU400. It will help remove the battery, the lower half casing, the removal of the motherboard from the phone casing, and the removal and replacement of the charging port on the motherboard. Before doing this, be aware that you will be unable to use your phone until the replacement is complete and the phone fully reassembled. You should also be careful when handling the motherboard because it has delicate wires extending from it. This guide also requires a soldering iron that can be dangerous to use.
Time Required Min
45分
Time Required Max
45分
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
いいえ
Summary
[ ]Following this guide will allow you to remove and replace the charging port on your LG CU400. Note that this guide will require the abilities to desolder, solder, de-micro solder, and micro solder.

ガイドの前提条件

ツール

  • Spunger x1 added.
  • Metal Spudger x1 added.
  • Phillips #0 Screwdriver x1 added.
  • Tweezers x1 added.
  • Solder x1 added.
  • Soldering Iron x1 added.
  • Desoldering Braid x1 added.
  • Micro Soldering Iron Conversion Kit Hakko FM-2032-52 fits FM-203 206 x1 added.
  • Micro Soldering Iron Hakko FM-2032-51 fits FM-203 206 x1 added.
  • Micro Soldering Tweezers Hakko FM-2023 fits FM-203 206 x1 added.

フラグ

  • In Progress added.
  • Student In Progress added.