メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

Motorola Droid Bionic Screen with digitizer Replacementはじめにへ変更

paulaspさんによる編集

承認の保留中

変更なし
デバイス
[ ]Motorola Droid Bionic
Type
[ ]repair
Thing
[ ]Screen with digitizer
Title
[ ]Repairing Motorola Droid Bionic Screen with digitizer
Introduction
1. Open Case [ … ] 2. Remove Battery, SD Card, SIM Card [ … ] 3. Remove 11 screws around perimeter [ … ] 4. Peel back sticker from below battery [ … ] 5. Remove back of phone [ … ] 6. Remove SIM board from mother board [ … ] 7. Disconnect three ribbon cables [ … ] 8. Separate mother board from screen assembly [ … ] 9. Remove LCD display from screen assembly [ … ] 10. Separate glass/digitizer from top frame [ … ] 11. Replace glass/digitizer and re-assemble
Time Required Min
見積もりなし
Time Required Max
見積もりなし
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
いいえ
Summary
[ ]Replacing the screen glass and digitizer with a new one. This repair is useful for cracked or broken glass where the LCD screen below it is not damaged.

フラグ

  • In Progress added.
  • Member-Contributed Guide added.