メインコンテンツにスキップ

DJI Phantom 2 Vision Plus Gimbal Yaw Arm Replacementはじめにへ変更

Rene Jeddoreさんによる編集

承認済みの編集 : Rene Jeddore

変更なし
デバイス
DJI Phantom 2 Vision Plus
Type
replacement
Thing
Gimbal Yaw Arm
Title
DJI Phantom 2 Vision Plus Gimbal Yaw Arm Replacement
Introduction
This guide will go through the steps I took to remove the gimbal and camera and then dismantle it to replace the gimbal yaw arm.
The process looked to be difficult but once I got into it it proved to be relatively easy.
Time Required Min
1時間
Time Required Max
1時間
Imageid
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
いいえ
Summary
After a crash bent the gimbal yaw arm I ordered one from ATK drones and did the replacement in about an hour.

ツール

  • Phillips #0 Screwdriver x1 added.
  • Hex/ Allen wrench x1 added.

パーツ

  • Gimbal Yaw Arm from ATK Drones x1 added.

フラグ

  • In Progress added.
  • Member-Contributed Guide added.

手順

Step #: 1
Step #: 2
Step #: 3
Step #: 4
Step #: 5
Step #: 6
Step #: 7
Step #: 8
Step #: 9
Step #: 10
Step #: 11