メインコンテンツにスキップ

How To Repair Jammed CanoScan LIDE 90 Scanner「はじめに」への変更

- danによって編集

承認の保留中

削除
追加
変更なし
デバイス
[ ]CanoScan LIDE 90
Type
[ ]repair
Thing
[ ]Casing Spine
Title
[ ]Repairing CanoScan LIDE 90 Casing Spine
Introduction
If your scanner gets jammed half way through then it could be that the casing is bent [ … ] There is a metal 'spine' that runs the length of the base inside the casing. This pushes the scanner head up and into the glass causing the motor to 'lockup' and creating a horrible noise. [ … ] If you open up the scanner and bend it flat again it solves the problem. [ … ] You can tell if it needs this by turning the scanner upside-down and placing a straight object (metal ruler?) along the length of the scanner back. If you can see bowing (dipping or a curve down) towards the centre of the back casing, the rail inside is probably bent.
Time Required Min
見積もりなし
Time Required Max
見積もりなし
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
dan
Public
いいえ
Summary
[ ]Does your scanner lock-up and jam half way through scanning with a horrible grinding noise?

フラグ

  • In Progress added.
  • Member-Contributed Guide added.

手順

Step #: 1