メインコンテンツにスキップ

Acer AL2216W Power Supply Capacitor Replacement「はじめに」への変更

- Nickによって編集

承認済みの編集 : Nick

削除
追加
変更なし
Introduction
If your AL2216W is having problems, it is very likely that it is a capacitor issue. Here are some signs of bad capacitors: '''Note:'''[ ] '''Note:''' While some issues may be corrected with a partial capacitor replacement, this is not recommended. I is better to change Do all of the caps at the same time to avoid having capacitors in one shot and you will not have to repair worry about the same issue multiple times. problem coming back a second time. [ ] * Power issues (This monitor has this issue) * Excessive transformer hum (This monitor has this issue) * Excessive inverter hum (This monitor has this issue) * Troublesome Auto adjustment (This monitor has this issue) * Backlight problems * Power problems * Video issues (Examples: Unstable image, Image drops when connected to a computer, does not play nice on higher resolutions, random image drops) * Random power issues that may only resolve if the monitor is physically unplugged. [ … ] === Original capacitor values (Only use these if you do not want to install better caps then the monitor came with) === * 25V 1000uF (x2) * 10V 1000uF (x1) * 25V 220uF (x2) * 16V 2200uF (Used on the inverter side of older power supplies)
If your AL2216W is having problems, it is very likely that it is a capacitor issue. Here are some signs of bad capacitors: '''Note:'''[ ] '''Note:''' While some issues may be corrected with a partial capacitor replacement, this is not recommended. I is better to change Do all of the caps at the same time to avoid having capacitors in one shot and you will not have to repair worry about the same issue multiple times. problem coming back a second time. [ ] * Power issues (This monitor has this issue) * Excessive transformer hum (This monitor has this issue) * Excessive inverter hum (This monitor has this issue) * Troublesome Auto adjustment (This monitor has this issue) * Backlight problems * Power problems * Video issues (Examples: Unstable image, Image drops when connected to a computer, does not play nice on higher resolutions, random image drops) * Random power issues that may only resolve if the monitor is physically unplugged. [ … ] === Original capacitor values (Only use these if you do not want to install better caps then the monitor came with) === * 25V 1000uF (x2) * 10V 1000uF (x1) * 25V 220uF (x2) * 16V 2200uF (Used on the inverter side of older power supplies)