メインコンテンツにスキップ

Acer AL2216W Power Supply Capacitor Replacement「はじめに」への変更

- Nickによって編集

承認済みの編集 : Nick

削除
追加
変更なし
Introduction
If your AL2216W is having problems, it is very likely that it is a capacitor issue. Here are some signs of bad capacitors: '''Note:''' While some issues may be corrected with a partial capacitor replacement, this is never recommended - it is better to change all of the caps at the same time to avoid having to repair the same issue multiple times. '''Replace all capacitors''' * Power issues (This monitor has this issue) * Excessive transformer hum (This monitor has this issue) * Excessive inverter hum (This monitor has this issue) * Troublesome Auto adjustment (This monitor has this issue) * Backlight problems * Power problems * Video issues (Examples: Unstable image, Image drops when connected to a computer, does not play nice on higher resolutions, random image drops) * Random power issues that may only resolve if the monitor is physically unplugged. [ … ] == Original capacitor values (Only use these if you do not want to install better caps then the monitor came with) == * 25V 1000uF (x2) * 10V 1000uF (x1) * 25V 220uF (x2)
If your AL2216W is having problems, it is very likely that it is a capacitor issue. Here are some signs of bad capacitors: '''Note:''' While some issues may be corrected with a partial capacitor replacement, this is never recommended - it is better to change all of the caps at the same time to avoid having to repair the same issue multiple times. '''Replace all capacitors''' * Power issues (This monitor has this issue) * Excessive transformer hum (This monitor has this issue) * Excessive inverter hum (This monitor has this issue) * Troublesome Auto adjustment (This monitor has this issue) * Backlight problems * Power problems * Video issues (Examples: Unstable image, Image drops when connected to a computer, does not play nice on higher resolutions, random image drops) * Random power issues that may only resolve if the monitor is physically unplugged. [ … ] == Original capacitor values (Only use these if you do not want to install better caps then the monitor came with) == * 25V 1000uF (x2) * 10V 1000uF (x1) * 25V 220uF (x2)