メインコンテンツにスキップ

Acer AL2216W Power Supply Capacitor Replacement「はじめに」への変更

- Nickによって編集

承認済みの編集 : Nick

削除
追加
変更なし
Introduction
is very likely that it is a capacitor issue. fault. Here are some signs of bad capacitors: [ … ] partial capacitor replacement, repair, this is not recommended. Do recommended as the repair once and you untouched capacitors will not have to worry about the problem coming back again. eventually fail. [ … ] * Power issues (Present issue) * Excessive transformer hum (Present issue) * Excessive inverter hum (Present issue) * Troublesome VGA Auto adjust (Present issue) * Backlight problems * Power problems image, Image drops when connected to a computer, does not play nice on PC connection issues, unreliable at higher resolutions, random image drops) resolutions) * Random power issues that may only resolve if the monitor is physically unplugged. values (Only use (Primarily reference only) === '''''NOTE: Most of these if you do not want values are obsolete. Many will need to install better caps then the monitor came with) === be substituted with modern replacements when they fail, so this is primarily included for reference purposes.''''' [ ] * 25V 1000uF (x2) * 10V 1000uF (x1) * 25V 220uF (x2) 2200uF (Used on the inverter side of older (Early power supplies)
is very likely that it is a capacitor issue. fault. Here are some signs of bad capacitors: [ … ] partial capacitor replacement, repair, this is not recommended. Do recommended as the repair once and you untouched capacitors will not have to worry about the problem coming back again. eventually fail. [ … ] * Power issues (Present issue) * Excessive transformer hum (Present issue) * Excessive inverter hum (Present issue) * Troublesome VGA Auto adjust (Present issue) * Backlight problems * Power problems image, Image drops when connected to a computer, does not play nice on PC connection issues, unreliable at higher resolutions, random image drops) resolutions) * Random power issues that may only resolve if the monitor is physically unplugged. values (Only use (Primarily reference only) === '''''NOTE: Most of these if you do not want values are obsolete. Many will need to install better caps then the monitor came with) === be substituted with modern replacements when they fail, so this is primarily included for reference purposes.''''' [ ] * 25V 1000uF (x2) * 10V 1000uF (x1) * 25V 220uF (x2) 2200uF (Used on the inverter side of older (Early power supplies)

ツール

  • Flathead Screwdriver x1 This WILL damage plastic, but works well on stubborn monitors. added.
  • Flathead Screwdriver x1 This WILL damage plastic, but works well to stubborn monitors. removed.